Skip to content
FREE domestic UPS Ground shipping takes 5 Business Days. Use MERRYXMAS8 Code and Enjoy 8% OFF on Orders $49+
FREE domestic UPS Ground shipping takes 5 Business Days. Use MERRYXMAS8 Code and Enjoy 8% OFF on Orders $49+

La Crosse Technology 925-1418 Sensor Weather Shield

Original price $19.99 - Original price $19.99
Original price
$19.99
$19.99 - $19.99
Current price $19.99

FREE Domestic Shipping Orders $49+

Easy 30-Day Returns

Best Price Guarantee

Expert Customer Service

La Crosse Technology 925-1418 Sensor Weather Shield

Sensor Shield only, Sensor is not included.

The Sensor Weather Shield is created to shield your outdoor sensors from rain and snow. It's important to note that the shield is included, but the sensor is not. This shield also provides some protection from the sun's heat.

You can find the full list of compatible sensors by clicking on the SPECS tab

Features

Mounts to a flat surface:

Twist the cover clockwise to remove the base.
Place one long screw through the center hole of the base.
Tighten until the head of the screw is flat with the base.
Do not overtighten.
OR Mounts to a wall or post:

Slide the mounting bracket down and remove from the cover.
Take note of the UP ARROW on the back of the bracket.
Find a shaded location and attach the bracket (arrow UP) with the four screws (included), or with the two zip ties (included).
Note: Allow room to slide cover onto bracket.
Slide the shield down onto the bracket.

Insert a Sensor for Protection from the Elements:

Twist the cover clockwise to remove the base.
Attach the Velcro tape to the sensor and to the upright on the base. This keeps the sensor from tipping.
Alternately, secure the sensor with a zip tie.
With a probe sensor, be sure the probe wire fits through the round hole in the base.
Place cover over sensor and base. Twist counter clockwise to lock into place. Sensor must fit entirely in the sensor shield to be protected.
Mount the sensor shield so that the sensor is in range of the display.

Specifications

Only recommended for use with the following La Crosse Technology outdoor sensors:

  • LTV-TH1
  • LTV-TH2
  • LTV-TH3
  • LTV-TH5
  • LTV-THP1-T1
  • TX21 (WS-1517)
  • TX6U
  • TX7U
  • TX141 Series
  • TX142 Series
  • TX143 Series
  • TX191
  • TX232TH-LCD
  • TX233TH
  • TX25U
  • TX28U-IT
  • TX29U-IT Series
  • TX37U-IT
  • TX38U-IT
  • TX40U-IT
  • TX44UDTH-IT
  • TX45 Series
  • TX50U-IT
  • TX60U-IT
  • TX70U-IT
  • TX71U-IT Series

Dimensions:

  • 7.00" H x 3.73" W x 3.98" D
Register/Warranty

La Crosse Technology, Ltd. provides, to the original purchaser, a 1-year limited time warranty on this product, relating to manufacturing defects in materials & workmanship.  In accordance with the Song-Beverly Act, in the state of California, the warranty on this item becomes effective on the date of delivery.  The item will be either repaired or replaced at La Crosse Technology's discretion.

Click Here for full warranty details

Trust Badge

La Crosse Technology 925-1418 Sensor Weather Shield

Sensor Shield only, Sensor is not included.

The Sensor Weather Shield is created to shield your outdoor sensors from rain and snow. It's important to note that the shield is included, but the sensor is not. This shield also provides some protection from the sun's heat.

You can find the full list of compatible sensors by clicking on the SPECS tab

Mounts to a flat surface:

Twist the cover clockwise to remove the base.
Place one long screw through the center hole of the base.
Tighten until the head of the screw is flat with the base.
Do not overtighten.
OR Mounts to a wall or post:

Slide the mounting bracket down and remove from the cover.
Take note of the UP ARROW on the back of the bracket.
Find a shaded location and attach the bracket (arrow UP) with the four screws (included), or with the two zip ties (included).
Note: Allow room to slide cover onto bracket.
Slide the shield down onto the bracket.

Insert a Sensor for Protection from the Elements:

Twist the cover clockwise to remove the base.
Attach the Velcro tape to the sensor and to the upright on the base. This keeps the sensor from tipping.
Alternately, secure the sensor with a zip tie.
With a probe sensor, be sure the probe wire fits through the round hole in the base.
Place cover over sensor and base. Twist counter clockwise to lock into place. Sensor must fit entirely in the sensor shield to be protected.
Mount the sensor shield so that the sensor is in range of the display.

Only recommended for use with the following La Crosse Technology outdoor sensors:

  • LTV-TH1
  • LTV-TH2
  • LTV-TH3
  • LTV-TH5
  • LTV-THP1-T1
  • TX21 (WS-1517)
  • TX6U
  • TX7U
  • TX141 Series
  • TX142 Series
  • TX143 Series
  • TX191
  • TX232TH-LCD
  • TX233TH
  • TX25U
  • TX28U-IT
  • TX29U-IT Series
  • TX37U-IT
  • TX38U-IT
  • TX40U-IT
  • TX44UDTH-IT
  • TX45 Series
  • TX50U-IT
  • TX60U-IT
  • TX70U-IT
  • TX71U-IT Series

Dimensions:

  • 7.00" H x 3.73" W x 3.98" D

La Crosse Technology, Ltd. provides, to the original purchaser, a 1-year limited time warranty on this product, relating to manufacturing defects in materials & workmanship.  In accordance with the Song-Beverly Act, in the state of California, the warranty on this item becomes effective on the date of delivery.  The item will be either repaired or replaced at La Crosse Technology's discretion.

Click Here for full warranty details

Shipping is fast and FREE within our country's lower 48 States for most orders $49+. For more details about shipping see the full shipping page here.

We offer 30-Day Easy Returns. If you decide you don't need a product, we'll take it back so long as it is in original and re-saleable condition. See the full details here.

Found a better price online? We'll match it or beat it if we can. 

All you need to do is let us know via phone or email (fulfillment@weatherscientific.com) and we'll let you know what we can do.

You will need to provide evidence of the better price online and it must include any shipping or taxes charged by that site. i.e. It needs to be the total price.

This only applies to new products, it does not apply to used condition products.

La Crosse Technology 925-1418 Sensor Weather Shield

Sensor Shield only, Sensor is not included.

The Sensor Weather Shield is created to shield your outdoor sensors from rain and snow. It's important to note that the shield is included, but the sensor is not. This shield also provides some protection from the sun's heat.

You can find the full list of compatible sensors by clicking on the SPECS tab

Mounts to a flat surface:

Twist the cover clockwise to remove the base.
Place one long screw through the center hole of the base.
Tighten until the head of the screw is flat with the base.
Do not overtighten.
OR Mounts to a wall or post:

Slide the mounting bracket down and remove from the cover.
Take note of the UP ARROW on the back of the bracket.
Find a shaded location and attach the bracket (arrow UP) with the four screws (included), or with the two zip ties (included).
Note: Allow room to slide cover onto bracket.
Slide the shield down onto the bracket.

Insert a Sensor for Protection from the Elements:

Twist the cover clockwise to remove the base.
Attach the Velcro tape to the sensor and to the upright on the base. This keeps the sensor from tipping.
Alternately, secure the sensor with a zip tie.
With a probe sensor, be sure the probe wire fits through the round hole in the base.
Place cover over sensor and base. Twist counter clockwise to lock into place. Sensor must fit entirely in the sensor shield to be protected.
Mount the sensor shield so that the sensor is in range of the display.

Only recommended for use with the following La Crosse Technology outdoor sensors:

  • LTV-TH1
  • LTV-TH2
  • LTV-TH3
  • LTV-TH5
  • LTV-THP1-T1
  • TX21 (WS-1517)
  • TX6U
  • TX7U
  • TX141 Series
  • TX142 Series
  • TX143 Series
  • TX191
  • TX232TH-LCD
  • TX233TH
  • TX25U
  • TX28U-IT
  • TX29U-IT Series
  • TX37U-IT
  • TX38U-IT
  • TX40U-IT
  • TX44UDTH-IT
  • TX45 Series
  • TX50U-IT
  • TX60U-IT
  • TX70U-IT
  • TX71U-IT Series

Dimensions:

  • 7.00" H x 3.73" W x 3.98" D

La Crosse Technology, Ltd. provides, to the original purchaser, a 1-year limited time warranty on this product, relating to manufacturing defects in materials & workmanship.  In accordance with the Song-Beverly Act, in the state of California, the warranty on this item becomes effective on the date of delivery.  The item will be either repaired or replaced at La Crosse Technology's discretion.

Click Here for full warranty details

Shipping is fast and FREE within our country's lower 48 States for most orders $49+. For more details about shipping see the full shipping page here.

We offer 30-Day Easy Returns. If you decide you don't need a product, we'll take it back so long as it is in original and re-saleable condition. See the full details here.

Found a better price online? We'll match it or beat it if we can. 

All you need to do is let us know via phone or email (fulfillment@weatherscientific.com) and we'll let you know what we can do.

You will need to provide evidence of the better price online and it must include any shipping or taxes charged by that site. i.e. It needs to be the total price.

This only applies to new products, it does not apply to used condition products.